Snyder, G. J. & Ursell, T. S. Thermoelectric efficiency and compatibility. Phys. Rev. Lett. 91, 148301 (2003).
Skomedal, G. et al. Design, assembly and characterization of silicide-based thermoelectric modules. Energy Convers. Manage. 110, 13–21 (2016).
Zhang, Q. et al. Realizing a thermoelectric conversion efficiency of 12% in bismuth telluride/skutterudite segmented modules through full-parameter optimization and energy-loss minimized integration. Energy Environ. Sci. 10, 956–963 (2017).
Xing, Y. et al. High-efficiency half-Heusler thermoelectric modules enabled by self-propagating synthesis and topologic structure optimization. Energy Environ. Sci. 12, 3390–3399 (2019).
Choo, S. et al. Geometric design of Cu2Se-based thermoelectric materials for enhancing power generation. Nat. Energy 9, 1105–1116 (2024).
Kraemer, D. et al. High thermoelectric conversion efficiency of MgAgSb-based material with hot-pressed contacts. Energy Environ. Sci. 8, 1299–1308 (2015).
Li, A. et al. Semiconductor-metal transition powers high-efficiency MgAgSb thermoelectrics. Sci. Adv. 11, eadx7115 (2025).
Ying, P. et al. Towards tellurium-free thermoelectric modules for power generation from low-grade heat. Nat. Commun. 12, 1121 (2021).
Xie, L. et al. Screening strategy for developing thermoelectric interface materials. Science 382, 921–928 (2023).
Wu, X. et al. A high performance eco-friendly MgAgSb-based thermoelectric power generation device near phase transition temperatures. Energy Environ. Sci. 17, 2879–2887 (2024).
Snyder, G. J. & Toberer, E. S. Complex thermoelectric materials. Nat. Mater. 7, 105–114 (2008).
He, J. & Tritt, T. M. Advances in thermoelectric materials research: looking back and moving forward. Science 357, eaak9997 (2017).
Yan, Q. & Kanatzidis, M. G. High-performance thermoelectrics and challenges for practical devices. Nat. Mater. 21, 503–513 (2022).
Deng, T. et al. Room-temperature exceptional plasticity in defective Bi2Te3-based bulk thermoelectric crystals. Science 386, 1112–1117 (2024).
Wang, Y. et al. Iterative sublattice amorphization facilitates exceptional processability in inorganic semiconductors. Nat. Mater. 24, 1545–1553 (2025).
Liu, W. & Bai, S. Thermoelectric interface materials: a perspective to the challenge of thermoelectric power generation module. J. Materiomics 5, 321–336 (2019).
Zuo, W. et al. Atomic-scale interface strengthening unlocks efficient and durable Mg-based thermoelectric devices. Nat. Mater. 24, 735–742 (2025).
Liu, D. et al. Lattice plainification and band engineering lead to high thermoelectric cooling and power generation in n-type Bi2Te3 with mass production. Natl Sci. Rev. 12, nwae448 (2025).
Liu, Z. et al. Demonstration of ultrahigh thermoelectric efficiency of ∼7.3% in Mg3Sb2/MgAgSb module for low-temperature energy harvesting. Joule 5, 1196–1208 (2021).
Zhang, X. et al. High-performance MgAgSb/Mg3(Sb,Bi)2-based thermoelectrics with η = 12% at T ≤ 583K. Joule 8, 3324–3335 (2024).
Zhang, X. et al. GeTe thermoelectrics. Joule 4, 986–1003 (2020).
Zhu, T., Fu, C., Xie, H., Liu, Y. & Zhao, X. High efficiency half-Heusler thermoelectric materials for energy harvesting. Adv. Energy Mater. 5, 1500588 (2015).
Li, W., Ghosh, S., Liu, N. & Poudel, B. Half-Heusler thermoelectrics: advances from materials fundamental to device engineering. Joule 8, 1274–1311 (2024).
Hu, H. et al. Highly stabilized and efficient thermoelectric copper selenide. Nat. Mater. 23, 527–534 (2024).
Xing, Y. et al. A device-to-material strategy guiding the “double-high” thermoelectric module. Joule 4, 2475–2483 (2020).
Qiu, P. et al. High-efficiency and stable thermoelectric module based on liquid-like materials. Joule 3, 1538–1548 (2019).
Xing, T. et al. High efficiency GeTe-based materials and modules for thermoelectric power generation. Energy Environ. Sci. 14, 995–1003 (2021).
Xie, L. et al. Lead-free and scalable GeTe-based thermoelectric module with an efficiency of 12%. Sci. Adv. 9, eadg7919 (2023).
Yin, L. et al. CALPHAD accelerated design of advanced full-Zintl thermoelectric device. Nat. Commun. 15, 1468 (2024).
Wang, P., Wang, K., Xi, L., Gao, R. & Wang, B. Fast and accurate performance prediction and optimization of thermoelectric generators with deep neural networks. Adv. Mater. Technol. 6, 2100011 (2021).
Zhu, Y., Newbrook, D. W., Dai, P., de Groot, C. H. K. & Huang, R. Artificial neural network enabled accurate geometrical design and optimisation of thermoelectric generator. Appl. Energy 305, 117800 (2022).
Momeni, A. et al. Training of physical neural networks. Nature 645, 53–61 (2025).
Wang, L. et al. Homogenizing composition to achieve high-performance Mg3Bi2-type thermoelectrics. Nano Energy 137, 110797 (2025).
Wang, L. et al. High-performance Mg3Sb2-based thermoelectrics with reduced structural disorder and microstructure evolution. Nat. Commun. 15, 6800 (2024).
Fu, C. et al. Realizing high figure of merit in heavy-band p-type half-Heusler thermoelectric materials. Nat. Commun. 6, 8144 (2015).
Jiang, B. et al. High figure-of-merit and power generation in high-entropy GeTe-based thermoelectrics. Science 377, 208–213 (2022).
Pei, Y. et al. Convergence of electronic bands for high performance bulk thermoelectrics. Nature 473, 66–69 (2011).
Chu, J. et al. Electrode interface optimization advances conversion efficiency and stability of thermoelectric devices. Nat. Commun. 11, 2723 (2020).
Yang, Q. et al. Flexible thermoelectrics based on ductile semiconductors. Science 377, 854–858 (2022).
Shi, X., Song, S., Gao, G. & Ren, Z. Global band convergence design for high-performance thermoelectric power generation in Zintls. Science 384, 757–762 (2024).
Liu, D. et al. Lattice plainification advances highly effective SnSe crystalline thermoelectrics. Science 380, 841–846 (2023).
He, W. et al. High thermoelectric performance in low-cost SnS0.91Se0.09 crystals. Science 365, 1418–1424 (2019).
Li, A., Wang, L., Li, J., Wu, X. & Mori, T. Self-optimized contact in air-robust thermoelectric junction towards long-lasting heat harvesting. Nat. Commun. 16, 1502 (2025).
Yin, L. et al. Low-temperature sintering of Ag nanoparticles for high-performance thermoelectric module design. Nat. Energy 8, 665–674 (2023).
Wu, X. et al. Interface and surface engineering realized high efficiency of 13% and improved thermal stability in Mg3Sb1.5Bi0.5-based thermoelectric generation devices. Adv. Energy Mater. 12, 2203039 (2022).
