Monday, November 25, 2024
No menu items!
HomeNatureLeptin-activated hypothalamic BNC2 neurons acutely suppress food intake

Leptin-activated hypothalamic BNC2 neurons acutely suppress food intake

Mice

All animal experiments were approved by the Institutional Animal Care and Use Committee at Rockefeller University and were carried out in accordance with the National Institutes of Health guidelines. Mice were group housed in a 12-h light/12-h dark cycle at 22 °C and 30–60% humidity with ad libitum access to a normal chow diet and water. We used the following mouse genotypes: C57BL/6J (wild type (WT); stock no. 000664, The Jackson Laboratory), NPY-IRES2-FlpO-D (The Jackson Laboratory, stock no. 030211), Rosa26-LSL-Cas9 (The Jackson Laboratory, stock no. 024857) and BNC2-P2A-iCre (see below). For all Cre or Flp mouse line experiments, only heterozygous animals were used. Sample sizes were decided on the basis of experiments from similar studies. Littermates of the same sex were assigned randomly to either experimental or control groups. The experiments were performed using both male and female mice, as indicated.

Generation of BNC2-P2A-iCre mouse line

The BNC2-P2A-iCre mouse line was generated by the CRISPR and Genome Editing Resource Center and Transgenic and Reproductive Technology Resource Center at Rockefeller University using CRISPR–Cas9 technology51. Briefly, a custom-designed long single-stranded DNA (lssDNA) donor, containing homology arms of Bnc2 locus flanking the P2A-iCre sequence, was inserted near the endogenous STOP codon. Two guide RNAs (sgRNAs) were used to induce site-specific double-stranded breaks. The lssDNA donor with the pre-assembled Cas9 protein–gRNA complexes was mixed and microinjected into C57BL/6J mouse zygotes following standard CRISPR genome engineering protocols. The resulting live offspring were genotyped by PCR with two sets of primers that specifically amplified the mutant allele. Validation was ensured by Sanger sequencing. The BNC2-P2A-iCre transgenic animals were bred to C57BL/6J mice for maintenance.

Viruses

AAVs used in these studies were obtained from Addgene, UNC Vector Core, or generated by Janelia Viral Tools Service. We used the following viruses: AAV5-hSyn-DIO-hM3D(Gq)-mCherry (Addgene, catalogue no. 44361, 2.2 × 1013 vg ml−1), AAV5-hSyn-DIO-hM4Di(Gi)-mCherry (Addgene, catalogue no. 44362, 2.5 × 1013 vg ml−1), AAV5-hSyn-DIO-mCherry (Addgene, catalogue no. 50459, 2.2 × 1013 vg ml−1), AAV5-Ef1a-DIO-EYFP (Addgene, catalogue no. 27056, 1.6 × 1013 vg ml−1), AAV5-hSyn-Flex-GCaMP6s-WPRE (Addgene, catalogue no. 100845, 2.9 × 1013 vg ml−1), AAV5-EF1a-DIO-hChR2(H134R)-EYFP (UNC Vector Core, 2.7 × 1012 vg ml−1), AAV1-hSyn1-SIO-stGtACR2-FusionRed (Addgene, catalogue no. 105677, 2.1 × 1013 vg ml−1), AAV5-Ef1a-fDIO-mCherry (Addgene, catalogue no. 114471, 2.3 × 1013 vg ml−1), AAV8-Ef1a-fDIO-GCaMP6s (Addgene, catalogue no. 105714, 2.1 × 1013 vg ml−1), AAV5&DJ-EF1a-fDIO-hChR2(H134R)-EYFP-WPRE (UNC Vector Core, 1.4 × 1012 vg ml−1), AAV5-Ef1a-mCherry-flex-dtA (Addgene, catalogue no. 58536, 3.88 × 1012 vg ml−1). For Lepr deletion, AAV viral vectors were cloned inhouse and packaged with the AAV5 serotype using Janelia Viral Tools Service. The sequences of sgLepR are: 5′-GAGTCATCGGTTGTGTTCGG-3′, 5′-TGCCGGCGGTTGGATG GACT-3′ (virus titre, 4.9 × 1012 vg ml−1); The sequence of sgCtrl is: 5′-TTTTTTTTTTTTTTGAATTC-3′ (virus titre, 8.5 × 1012 vg ml−1). Viral aliquots were stored at −80 °C before stereotaxic injection.

Chemicals and diet

The following chemicals were used in this study: Leptin (ThermoFisher Scientific, catalogue no. 498OB05M, 3 mg kg−1 or 5 mg kg−1, intraperitoneal injection), Sema (Millipore Sigma, catalogue no. AT35750, 10 nmol kg−1, subcutaneous injection), CNO dihydrochloride (Tocris, catalogue no. 6329, 3 mg kg−1, intraperitoneal injection), sucrose tablets 20 mg (TestDiet, catalogue no. 1811555) and HFD (Research Diets, 60% kcal% Fat).

Stereotactic surgery

Mice (8–10 weeks old) were anaesthetized using isoflurane anaesthesia (induction 5%, maintenance 1.5–2%) and positioned on a stereotaxic rig (Kopf Instruments, Model 1900). Viruses were delivered into the brains through a glass capillary using a Drummond Scientific Nanoject III Programmable Nanoliter Injector. For the ARC region, the following coordinates relative to the bregma were used: anterior–posterior, −1.65 mm to −1.70 mm; medial–lateral (ML), ±0.25 mm to 0.30 mm and dorsal–ventral (DV), −5.9 mm. For chemogenetics experiments, Bnc2 neuron labeling and Lepr deletion, 30–50 nl of the virus was injected bilaterally at a rate of 1 nl s−1. For optogenetics, 30 nl of the virus was injected unilaterally at a rate of 1 nl s−1 followed by the implant of an optical fibre (ThorLabs, catalogue no. CFM12U-20) at 200 µm above the ARC (anterior–posterior, −1.65 mm; ML, 0.3 mm; DV, −5.7 mm). For fibre photometry experiments, 30 nl of the virus was injected unilaterally followed by the implant of an optical fibre cannula (Doric, catalogue no. MFP_400/430/1100-0.57_1m_FCM-MF2.5_LAF) at 150 µm above the ARC (anterior–posterior, −1.65 mm; ML, 0.3 mm; DV, −5.75 mm). For CRACM experiments, the two viruses were mixed at the ratio of 1:1, and 50 nl of the mixed virus was injected bilaterally into the ARC.

Isolation of nuclei and snRNA-seq

Male C57BL/6J mice aged 10–12 weeks were euthanized by transcardial perfusion using ice-cold HEPES-Sucrose Cutting Solution containing NaCl (110 mM), HEPES (10 mM), glucose (25 mM), sucrose (75 mM), MgCl2 (7.5 mM) and KCl (2.5 mM) at pH 7.4 (ref. 52). Subsequently, brains were dissected quickly in the same solution, frozen using liquid nitrogen and stored at −80 °C until nuclei isolation. To isolate nuclei, as described previously53,54, the samples were thawed on ice, resuspended in HD buffer containing tricine KOH (10 mM), KCl (25 mM), MgCl2 (5 mM), sucrose (250 mM), 0.1% Triton X-100, SuperRNaseIn (0.5 U ml−1), RNase Inhibitor (0.5 U ml−1). Samples were homogenized using a 1 ml dounce homogenizer. The resulting homogenates were filtered using a 40 μM filter, centrifuged at 600g for 10 min and resuspended in nucleus storage buffer containing sucrose (166.5 mM), MgCl2 (10 mM), Tris buffer (pH 8.0, 10 mM), SuperRNaseIn (0.05 U ml−1), RNase Inhibitor (0.05 U ml−1) for subsequent staining. Nucleus quality and number were assessed using an automated cell counter (Countess II, ThermoFisher). For staining, nuclei were labelled with Hoechst 33342 (ThermoFisher Scientific, catalogue no. H3570; 0.5 µl per million nuclei), anti-NeuN Alexa Fluor 647-conjugated antibody (Abcam, catalogue no. ab190565; 0.5 µl per million nuclei) and TotalSeq anti-Nuclear Pore Complex Proteins Hashtag antibody (BioLegend, catalogue no. 682205; 0.5 mg per million nuclei) for 15 min at 4 °C. Following staining, samples were washed with 10 ml 2% BSA (in PBS) and centrifuged at 600g for 5 min. Nuclei were then resuspended in 2% BSA (in PBS) with RNase inhibitors (SuperRNaseIn 0.5 U ml−1, RNase Inhibitor 0.5 U ml−1) for subsequent fluorescence-activated cell sorting. The samples were gated on the basis of Hoechst fluorescence to identify nuclei and then further sorted on the basis of high Alexa Fluor 647 expression, designating NeuN+ nuclei as neurons.

Nuclei were captured and barcoded using 10x Genomics Chromium v.3 following the manufacturer’s protocol. The processing and library preparation were carried out by the Genomics Resource Center at Rockefeller University, and sequencing was performed by Genewiz using Illumina sequencers.

SnRNA-seq analysis

The FASTQ file was analysed with Cell Ranger v.5.0. The snRNA-seq data for ARC (WT) was preprocessed individually using the Seurat v.4 (v.4.0.3)55. Cells with more than 800 and fewer than 5,000 RNA features were selected for further analysis. Cells with greater than 1% mitochondrial genes and greater than 12,000 total RNA counts were also removed. Genes detected in fewer than three cells were excluded. We then demultiplexed the cells on the basis of their hashtag count (positive quantile = 0.8) using the built-in function in Seurat v.4. Only the cells with singlet Hashtag assignment were kept for downstream analysis. The data was then log-normalized with a scale factor of 10,000. After the initial quality control, demultiplexing and normalization steps, all the singlets were then scaled and reduced dimensionally with principal component analysis and uniform manifold approximation and projection (UMAP). Leiden clustering (resolution = 0.55) was applied to identify clusters. We used known cell-type specific gene expression to annotate the clusters.

We analysed co-expression of marker genes within the human ARC using previously published human adult samples, and the data can be accessed through the NeMO archive (https://assets.nemoarchive.org/dat-917e9vs). A cell was considered to express the marker gene if at least two unique molecular identifiers were detected. The identification of arcuate cells was achieved by clustering and the expression of canonical markers, as detailed in the earlier study. Co-expression of genes such as Lepr, Bnc2, Agrp, Npy and Pomc was tabulated in R, and two-tailed Fisher’s tests were calculated to assess the significance of co-expression of gene pairs within the 16,819 arcuate cells in the human dataset.

Chemogenetics for activation or inhibition

AAV viruses were delivered bilaterally into the ARC of male BNC2-Cre mice aged 8–10 weeks. Mice were then allowed to recover and express DREADDs for at least 3 weeks. For activation or inhibition, animals were injected intraperitoneally with 3 mg kg−1 of CNO or PBS (control).

Optogenetics for activation or inhibition

AAV viruses were delivered unilaterally into the ARC of male BNC2-Cre mice aged 8–10 weeks followed by the implantation of an optic fibre. Subsequently, the mice were given a recovery period of at least 3 weeks to allow for gene expression. Before the experiments, the mice were habituated to patch cables over a period of 5 days. The implanted optic fibres were connected to patch cables using ceramic sleeves (Thorlabs) and linked to a 473 nm laser (OEM Lasers/OptoEngine). The output of the laser was verified at the beginning of each experiment. A blue light, generated by a 473 nm laser diode (OEM Lasers/OptoEngine) with a power of 15 mW, was used. The light pulse (10 ms) and frequency (20 Hz) were controlled by a waveform generator (Keysight) to either activate or inhibit BNC2 neurons in the ARC. In the activation feeding experiments, mice were allowed to acclimate to the cage for 20 min. Subsequently, three feeding sessions, each lasting 20 min, were initiated. During these sessions, the light was turned off for the initial 20 min, switched on for the subsequent 20 min and then turned off again for the remaining 20 min. In the inhibition feeding experiments, following the 20 min acclimation, each feeding session was extended to 30 min. The amount of food consumed during each feeding session was recorded manually. Animals were euthanized at the end of the experiments to confirm viral expression and fibre placement using immunohistochemistry.

Real-time place preference

A custom-made two-chamber box (50 × 50 × 25 cm black plexiglass) with an 8.5 cm gap enabling animals to move freely between the chambers was used for this assay. To evaluate the initial preference of the mice, they were introduced into the box for a 10 min session without any photostimulation. Subsequently, in the second 10 min session following the initial one, photostimulation (15 mW, 20 Hz) was paired with the chamber for which the mice exhibited less preference during the initial session. The Ethovision XT v.13 software, coupled with a CCD camera, facilitated the recording of the percentage of time spent by the mice in each chamber.

Fibre photometry

Mice were acclimated to tethering and a home-cage-style arena for 5 min daily over the course of 5 days before the experiment. Data acquisition was conducted using a fibre photometry system from Tucker-Davis Technologies (catalogue no. RZ5P, Synapse) and Doric components, with recordings synchronized to video data in Ethovision by transistor–transistor logic triggering. A dual fluorescence Mini Cube (Doric) combined light from 465 nm and isosbestic 405 nm light-emitting diodes (LEDs), which were transmitted through the recording fibre connected to the implant. GCaMP6s fluorescence, representing the calcium-dependent signal (525 nm), and isosbestic control (430 nm) were detected using femtowatt photoreceivers (Newport, catalogue no. 2151) and a lock-in amplifier at a sampling rate of 1 kHz. Analysis was conducted using a Matlab script involving the removal of bleaching and movement artifacts using a polynomial least square fit applied to the 405 nm signal, adjusting it to the 465 nm trace (405fitted), and then calculating the GCaMP signal as %ΔF/F = (465signal − 405fitted)/405fitted. The resulting traces were filtered using a moving average filter and down-sampled by a factor of 20. The code is available upon request.

In situ hybridization

Mice were briefly transcardially perfused with ice-cold RNase-free PBS. Brains were then quickly collected, embedded in optimal cutting temperature embedding medium on dry ice, and stored at −80 °C until cryostat sectioning (15 µm thickness) onto Superfrost Plus Adhesion Slides (ThermoFisher). The RNAscope Fluorescent Multiplex assay (Advanced Cell Diagnostics Bio) was based on the manufacturer’s protocol. All reagents were purchased from Advanced Cell Diagnostics (ACDbio). Probes for the following mRNAs were used: Agrp (catalogue no. 400711-C3), Pomc (catalogue no. 314081-C3), Lepr (catalogue no. 402731), Slc31a1 (catalogue no. 319191) and Bnc2 (catalogue no. 518521-C2). Briefly, brain sections were fixed in 4% paraformaldehyde (PFA) at 4 °C for 15 min followed by serial submersion in 50% ethanol, 70% ethanol, and twice in 100% ethanol for 5 min each at room temperature. Sections were treated with Protease IV for 30 min at room temperature followed by a 2 h incubation with specific probes at 40 °C using a HyBez oven. Signal amplification was achieved through successive incubations with Amp-1, Amp-2, Amp-3 and Amp-4 for 30, 15, 30 and 15 min, respectively, at 40 °C using a HyBez oven. Each incubation step was followed by two 2 min washes in RNAscope washing buffer. Nucleic acids were counterstained with DAPI Fluoromount-G (SouthernBiotech) mounting medium before coverslipping. The slides were visualized using an inverted Zeiss LSM 780 laser scanning confocal microscope with a ×20 lens. The acquired images were imported into Fiji for further analysis.

Immunohistochemistry

Mice were perfused transcardially with PBS first and then 4% PFA for fixation. Brains were collected and immersed in 4% PFA overnight at 4 °C for more fixation. Fixed brains were immersed sequentially in 10% sucrose, 20% sucrose and 30% sucrose buffers for 1 h, 1 h and overnight, respectively, all at 4 °C. After this, the brains were embedded in optimal cutting temperature embedding medium and stored at −80 °C until cryostat sectioning (30–50 µm thickness). For the staining process, brain sections were first blocked in a blocking buffer containing 3% BSA, 2% goat serum and 0.1% Triton X-100 in PBS for 30 min at room temperature followed by an overnight incubation with primary antibodies in the cold room. After washing in PBS, the sections were incubated with fluorescence-conjugated secondary antibodies (Invitrogen) for 1 h at room temperature. Stained sections were mounted onto SuperFrost (Fisher Scientific catalogue no. 22-034- 980) slides and then visualized with an inverted Zeiss LSM 780 laser scanning confocal microscope with a ×10 or ×20 lens. The acquired images were imported to Fiji for further analysis. The following antibodies were used: FOS antibody (1:1,000; Synaptic systems, catalogue no. 226308), pSTAT3 antibody (1:1,000; Cell Signaling Technology, catalogue no. 9145 s), GFP (1:1,000; abcam, catalogue no. ab13970), RFP (1:1,000; Rockland, catalogue no. 600-401-379).

Electrophysiology and CRACM

Adult mice were euthanized by transcardial perfusion using ice-cold cutting solution containing choline chloride (110 mM), NaHCO3 (25 mM), KCl (2.5 mM), MgCl2 (7 mM), CaCl2 (0.5 mM), NaH2PO4 (1.25 mM), glucose (25 mM), ascorbic acid (11.6 mM) and pyruvic acid (3.1 mM). Subsequently, brains were quickly dissected in the same solution and sectioned using a vibratome into 275 µm coronal sections. These sections were then incubated in artificial cerebral spinal fluid containing NaCl (125 mM), KCl (2.5 mM), NaH2PO4 (1.25 mM), NaHCO3 (25 mM), MgCl2 (1 mM), CaCl2 (2 mM) and glucose (11 mM) at 34 °C for 30 min, followed by room temperature incubation until use. The intracellular solution for current-clamp recordings contained K-gluconate (145 mM), MgCl2 (2 mM), Na2ATP (2 mM), HEPES (10 mM) and EGTA (0.2 mM, 286 mOsm, pH 7.2). The intracellular solution for the voltage-clamp recording contained CsMeSO3 (135 mM), HEPES (10 mM), EGTA (1 mM), QX-314 (chloride salt, 3.3 mM), Mg-ATP (4 mM), Na-GTP (0.3 mM) and sodium phosphocreatine (8 mM, pH 7.3 adjusted with CsOH). Signals were acquired using the MultiClamp 700B amplifier and digitized at 20 kHz using DigiData1550B (Molecular Devices). The recorded electrophysiological data were analysed using Clampfit (Molecular Devices) and MATLAB (Mathworks).

For CRACM experiments, voltage-clamp recordings were conducted on BNC2 and NPY neurons. To record oIPSCs, the cell membrane potential was held at 0 mV. ChR2-expressing axons were activated using brief pulses of full-field illumination (0.5 ms, 0.1 Hz, ten times) onto the recorded cell with a blue LED light (pE-300 white; CoolLED). Subsequently, TTX (1 µM), 4-AP (100 mM) and PTX (1 µM) were applied sequentially through the bath solution, each for 10–20 min. Data acquisition started at least 5 min after each drug application.

Indirect calorimetry

Indirect calorimetry was performed using the Phenomaster automated home cage phenotyping system (TSE Systems). Mice were housed individually in environmentally controlled chambers maintained at 22 °C, following a 12 h light/12 h dark cycle, and at 40% humidity, with ad libitum access to food and water. O2 and CO2 measurements were collected at 15 min intervals with a settling time of 3 min and a sample flow rate of 0.25 l min−1. The raw data obtained were analysed using CalR56.

Blood glucose, GTT and ITT

Blood glucose levels were measured using a OneTouch Ultra meter and glucose test strips. For GTTs, mice were fasted overnight followed by a 20% glucose injection (2 g kg−1) and glucose measurements at 0, 15, 30, 60 and 120 min. ITTs were conducted after a 4 h fast, with insulin injection (0.75 U kg−1) and glucose measurements at 0, 15, 30, 45 and 60 min. To test how BNC2 neuron activity affected glucose metabolism, CNO was injected for 1 h before the start of GTT and ITT experiments.

Statistical analysis

All statistical analyses used GraphPad Prism v.9. Data distribution was tested for normality (Shapiro–Wilk test) and then comparisons were made using parametric or non-parametric tests, as appropriate. Two-tailed statistical tests were used, and statistical significance was determined by Student’s t-test, Mann–Whitney test, Fisher’s exact test, one-way or 2-way ANOVA, and Friedman test as indicated in the Source Data.

Reporting summary

Further information on research design is available in the Nature Portfolio Reporting Summary linked to this article.

RELATED ARTICLES

Most Popular

Recent Comments